PRODUCTS
 

   Cermet II/ Cermet II I.S.

 

Cermet II is the intelligent choice for reliable on-line measurement of moisture in virtually any gas. It can compensate for variations in dew point due to changes in the gas line pressure, either by the use of a live pressure transducer input, or by the use of a pressure factor calculation input via the instrument front panel.
 

APPLICATION EXAMPLES

  • Compressed Gas
  • Breathing Air
  • Natural Gas & Petrochemicals
  • Power Generation
  • Research & Development

TECHNICAL SPECIFICATIONS

  • Calibration Range: -100 to +20 º c dew point
  • Power Supply: 85 Vac to 265 Vac or 18 Vdc to 36 Vdc
  • Output: Current, RS 232/RS 485, Relay
  • Display Units: °C or °F dew point, ppmV, Lb/mmscf or gm -3
  • Accuracy: ± 1 º C dew point
  • Operating Temperature: Electronics: -20 to +50 º C; Sensor: -40 to +60 º C
  • Operating Pressure: From Vacuum to 30 MPa
  • Protection: IP 65
  • Optional Intrinsically safe model available.
  
 
 
 
Home  :  Products  :  Moisture  :  Impedance  :  Online  :  Cermet II/ Cermet II I.S.
 
© Copyright Toshbro Controls Pvt. Ltd. All rights reserved.   Home  |  Contact Us  |  Sitemap