SolidFlow is a sensor especially developed for measuring the flow rate of solids conveyed in metallic pipes from 20mm to 600mm. The sensor works according to the latest microwave technology. It is wear-resistant and the commissioning is very easy.
The sensor has successfully been tested for online-measuring of:
types of dust, types of powder, granulates
grain size between 1 nm and 1 cm
pneumatically conveyed materials
in free fall after mechanical conveying systems
APPLICATION EXAMPLES
Proportioning System
Secondary Fuel Output
Totalizing
Granules Proportioning System
TECHNICAL SPECIFICATIONS
Sensor:-
Housing :
Stainless steel 1.4541 or galvanised Steel St 52
Max. Working pressure :
1 bar
Optional:
10 bar
Working frequency :
K-Band 24,125 GHz, ±100 MHz
Transmitting power :
Max. 5 mW
Accuracy :
± 2 … 5% in calibrated range
Evaluation Unit:-
Supply voltage :
110/230 V, 50 Hz, 24 V DC
Operating temperature :
-10 … +45 °C [+14 … +113 °F]
Current output signal :
4 … 20 mA (0 … 20 mA) Load < 700 Ω
Voltage output signal
2 … 10 V (0 … 10 V), Load > 2 kΩ
Our in-house calibration rig is traceable to national standards.
Closed Pipe
SolidFlow(Dilute Phase)
