PRODUCTS
 

   Solid Flow(Dilute Phase)

 

SolidFlow is a sensor especially developed for measuring the flow rate of solids conveyed in metallic pipes from 20mm to 600mm. The sensor works according to the latest microwave technology. It is wear-resistant and the commissioning is very easy.
The sensor has successfully been tested for online-measuring of:

  • types of dust, types of powder, granulates
  • grain size between 1 nm and 1 cm
  • pneumatically conveyed materials 
  • in free fall after mechanical conveying systems
 

APPLICATION EXAMPLES

  • Proportioning System
  • Secondary Fuel Output
  • Totalizing
  • Granules Proportioning System

TECHNICAL SPECIFICATIONS

Sensor:-  
Housing : Stainless steel 1.4541 or galvanised Steel St 52
Max. Working pressure : 1 bar
Optional: 10 bar
Working frequency : K-Band 24,125 GHz, ±100 MHz
Transmitting power : Max. 5 mW
Accuracy : ± 2 … 5% in calibrated range
Evaluation Unit:-  
Supply voltage : 110/230 V, 50 Hz, 24 V DC
Operating temperature : -10 … +45 °C [+14 … +113 °F]
Current output signal : 4 … 20 mA (0 … 20 mA) Load < 700 Ω
Voltage output signal 2 … 10 V (0 … 10 V), Load > 2 kΩ
  
 
 
 
Home  :  Products  :  Solid Handling  :  Flow  :  Solid Flow Measurement  :  Solid Flow(Dilute Phase)
 
© Copyright Toshbro Controls Pvt. Ltd. All rights reserved.   Home  |  Contact Us  |  Sitemap