Model MFI 860 -Magnetic Flow Meter

• Power Supply: 90 Vac to 265 Vac, 50/60Hz
• Accuracy: ± 0.5% of flow rate
• Outputs: 4-20 mA, pulse, frequency, relay.
• Local Display: 16x2 LCD Alphanumeric
• Flow Range: 0.5m/s to 10m/s
• Minimum Conductivity: 5 µS/cm (Micro Siemens/centimeter)
• Ambient temperature: -20 to 60° C
• Process temperature: up to 80° C; Optional: up to 150° C
• Lining: PTFE, Rubber
• Electrodes: SS 316,Hastalloy 'C', Titanium, Monel and Pt- Rh
• Protection: IP67; Optional: IP 68

Typical applications of our magnetic flow meter is monitoring of fluids, filling, dosing and precise measurement in custody transfer

Media:-

• Liquids – Potable Water, Raw Water, Chilled Water, Beverages, Juices
• Corrosive Liquids – Acids, Alkalis, Chemical Solutions
• Slurries & Pastes – Coal slurry, Sugar Syrup, Effluents, Sewage, Molasses

The electromagnetic flow meter works on the principle of Faraday’s law of Electromagnetic Induction. A magnetic field is generated by the instrument in the flow tube. The fluid flowing through this magnetic field generates a voltage that is proportional to the flow velocity. This voltage is measured by the electronics and a corresponding output provided.

1. Brochure

• 

  Sanitary Electromagnetic Flowmeter